Skip to content

Posts from Cheat Codes for Tribes of the East.

No ratings yet — be the first to rate!
User Avatar
Auto-translated
Cheats don't matter anyway, they don't work in multiplayer... And everyone plays the campaign however they want... If someone wants to just move around with large stacks and win easily, that's fine, but there's no benefit to that kind of gameplay... I tried it myself when the fifth Heroes game was released, and I completed it with cheats (starting with that famous mission (2) with Agrael) - it didn't make me a better player, and I wasted so much time... Just imagine - wasting time just clicking buttons, because no matter how badly you fight, you'll still win with numbers)). But recently, a bad trend has emerged - using ArtMoney - this is something that needs to be strongly condemned, I'm just bursting with anger when I play multiplayer on Hero difficulty, and at the beginning, you're scraping together resources, while your opponent has full warehouses... In this regard, a question for the experts - is there any way to protect against this? Thank you in advance... P.S. If this is considered off-topic, send suggestions on what can be done in a private message...
So many centuries
So many Gods
We were the prisoners of our own fantasy
But now we are marching
Against these Gods
I'm the wizard, I will change it all
Valhalla - Deliverance
Why've you ever forgotten me


19.08.2008 СК Олимпийский.Я запомню это навсегда!!!

Как играть онлайн в Герои 5??Ответ здесь
In reply to Julyanna
Auto-translated
Julyanna;131223
Of course, there is. I created them myself – other sites don't have instructions on how to create the codes.
bind show_console '`' – insert this into input_a2.cfg (but first, you need to open it with Notepad). The file itself is located in the Heroes of Might and Magic V - Tribes of the East folder, in the profiles, default_profile subfolder.

// obsolete, but strictly need for compatibility with some interfaces
bind close_window 'ESC'
bind confirm_action 'ENTER'
bind confirm_action 'NUM_ENTER'
bind show_console '`'

//===========================================================================
// Interface-specific sections

If so, save it.

In autoexec_a2.cfg, which is located in the profiles folder, add the following to the end: setvar dev_console_password = schwinge-des-todes

The end should look like this:
//============================================================================
// Startup
exec profiles\map-aliases.cfg
exec profiles\start.cfg
setvar dev_console_password = schwinge-des-todes

If so, save it.

And finally, add bind show_console '`' to the input_a2.cfg file, which is located in "C:/Documents and Settings/Owner/My Documents/My Games/Heroes of Might and Magic V — Tribes of the East/Profiles/Owner" (Owner is the account name).

In the file, this section should look like this:

// obsolete, but strictly need for compatibility with some interfaces
bind close_window 'ESC'
bind confirm_action 'ENTER'
bind confirm_action 'NUM_ENTER'
bind show_console '`'

//===========================================================================
// Interface-specific sections

Save it if it's correct, start the game, load a save, and check. If you followed my somewhat confusing instructions, pressing the key should bring up the console, where you need to enter the codes. But before that, to make the codes work in the console, you need to type eneble_cheats. A message will appear saying that the codes now work, and then enter the code you need. You need to type eneble_cheats on each mission, once.


Hi, can you help me? I don't understand.
I did everything, but the console doesn't appear? :(
User Avatar
Auto-translated
To use the codes, you need to activate the console. To do this, find the autoexec_a1.cfg file in the game directory, in the profiles folder.
Open it with Notepad and add the following line to the end of the file:

setvar dev_console_password = schwinge-des-todes

As a result, the end of the file should look like this:

//==================================
// Startup
mainmenu
setvar dev_console_password = schwinge-des-todes. After that, you will most likely need to add the following line to the input_a1.cfg file:

bind show_console '`'

so that the game knows what the console is and it looks like this:

// obsolete, but strictly need for compability with some interfaces
bind close_window 'ESC'
bind confirm_action 'ENTER'
bind confirm_action 'NUM_ENTER'
bind show_console '`'

Afterthattheconsolewillwork.The line bind show_console '`' must be added to two files (input_a1.cfg), the first in "Heroes of Might and Magic V/profiles",
the second in "C:/Documents and Settings/Owner/My Documents/My Games/Heroes of Might and Magic V/Hammers of Fate/Profiles/Owner" (Owner - account name)

The console will work, but the codes won't, to make them work, enter the codes in the console

enable_cheatsyou will see a message that the codes are active, but this reduces the playability of the game, but this is not important.

Save the file. Run the game. During the game, call the console with the [ё] key and enter the codes.
Подумайте! Перед тем чтобы что-то делать...:smile39: :smile39:
Auto-translated
Does anyone know, could you please advise? If I play with codes and have an initial save file where the codes haven't been used yet, will loading that save and playing the game without codes afterward result in me being labeled as a cheater? Or do I need to restart the game like in Heroes of Might and Magic III? In short, how do I play offline tournaments?
User Avatar
Auto-translated
I followed all the instructions.
I have a couple of questions – please help with some advice.
enable_cheats worked.
The console appears – everything is fine.

I'm using the command @ClearFog().
It should reveal the map.
But it gives some kind of error, and it's not just that the command doesn't exist.
It says that something is written incorrectly in the command itself, something about NIL.

And my second question:
The console appears at the top of the screen, and there are only a few lines in it.
When I use the command help to display the entire list of commands,
it says that there are 456 commands (or so), but I only see the last few that fit in the console lines.
I can't figure out how to scroll through the rest of the list or output it to a file.

Added after 20 hours and 54 minutes
I'll add that it's version 3.0; maybe that's why the experts are silent.
In reply to dwp1970
User Avatar
Auto-translated
To be precise:
The following error occurs when running @ClearFog():

"Value was NIL getting global with name 'ClearFog' (Script) ERROR attempt to call a nil value"

I searched other forums, and they say that this script only works on version 1.xxx and doesn't work on 3.0.

Can anyone refute this?
Please answer!


Added after 20 hours and 56 minutes
In general, I found another function
ClearCircleFog(parameters here)
that does the same thing.
So, the question is closed.
User Avatar
Auto-translated
You wrote it incorrectly.
It should be enable_cheats, not eneble_cheats.
There was a typo in the English word.
User Avatar
Auto-translated
I have a problem=) The console started, the cheats were activated, but none of them work=( Does anyone know what the problem is?

Added 10 minutes later
S-t-i-n-g;181625
I have a problem=) The console started, the cheats were activated, but none of them work=( Does anyone know what the problem is?
I solved it myself=) It turns out that you need to enter enable_cheats before each game=)
In reply to S-t-i-n-g
User Avatar
Auto-translated
Does anyone know the exact number of perks and skills in the Tribes of the East? :D

P.S. And also, you all probably know about the trick with the army size in the Tribes of the East, when you use something like add_army 2, 1 99999
where 99999 is the number of each creature in the army. :D
User Avatar
Auto-translated
Who knows the code for mana?!
Auto-translated
Does anyone happen to know of a cheat or trainer that allows for infinite building, so you can build all the buildings in a town immediately?
User Avatar
Auto-translated
Wouldn't that be too much?))) As far as I know, there aren't any such cheats, but the ones that do exist can be found in the HOMM5_CheatCodes file in the Editor documentation folder.
Армия баранов под предводительством льва сильнее армии львов под предводительством барана.

God save us everyone
Will we burn inside the fires of a thousand suns...
In reply to Vayshan
Auto-translated
Guys, please help. There's a cheat for Tribes of the East: @Dragons() (it adds, I think, 1000 dragons).
But for some reason, it doesn't work (all other codes do work).
The error message is: "Value was NIL getting global with name 'Dragons' (Script)
ERROR attempt to call a nil value".
I really need a cheat that adds as many creatures as possible to the army (preferably dragons). I tried the cheat add_army 9,0, but it only worked once (which isn't enough).
In reply to Danila-Ural
User Avatar
Auto-translated
Danila-Ural;185376
Guys, please help. There's a cheat for the Tribes of the East: @Dragons() (it adds, I think, 1000 dragons).
But it doesn't work (all other codes do work).
The error message is: "Value was NIL getting global with name 'Dragons' (Script)
ERROR attempt to call a nil value".
I really need a cheat that adds as many creatures as possible to the army (preferably dragons). I tried the cheat add_army 9,0, but it only worked once (and that's not enough).
As far as I remember, you need to write it like this: add_army 1(creature type number), 1 or 2(alt-upgrade), 110(number of units).
P.S.: The cheat add_army 9,0 seems to give neutral creatures.
Небо – мольбы не ждёт
Небо – угроз не слышит
Небо – ведёт особый счёт
Небо – тебя найдёт

По вопросам модерации: nebov24@gmail.com

Statistics

Welcome our newest member: Emil