Auto-translated
Such a gate :)
fktifzobr@mail.ru
Posts from New garrisons.
Garstan
Auto-translated
Can the hinges actually be cut off? And can the crossbar be widened slightly so that it doesn't hang in the air? Or, as an alternative, can it be raised to the protruding beams that stick out a little higher?
fktifzobr@mail.ru
Auto-translated
well, you can remove the loops, but you can't widen the gates.
Garstan
Auto-translated
Don't widen the gate, but rather the crossbar that hangs in the air between the two pillars. If it's not possible to widen it, can it be raised to the protruding beams so that there is no gap between the crossbar and the pillars?
fktifzobr@mail.ru
Auto-translated
this isn't a beam, but rather an uncleaned part of the gate that, unfortunately, cannot be extended, but there are a couple of ideas:
1. Take the gate from the un-upgraded Elven Fortress, but there might be problems, and it will have to be recolored.
2. Insert a second model into the gate, possibly raising it or redrawing a hole.
1. Take the gate from the un-upgraded Elven Fortress, but there might be problems, and it will have to be recolored.
2. Insert a second model into the gate, possibly raising it or redrawing a hole.
fktifzobr@mail.ru
Auto-translated
I inserted the second beam; it's a piece of the wall.
Garstan
Auto-translated
I'll test it now.
Yes, this is exactly what I wanted. Perfect. Thank you very much!
Some problems arise when applying effects to the new gates. The texture starts to flicker. But it's not important; I removed the effects, and it's working fine now. The main thing is that the gates are now there.
Yes, this is exactly what I wanted. Perfect. Thank you very much!
Some problems arise when applying effects to the new gates. The texture starts to flicker. But it's not important; I removed the effects, and it's working fine now. The main thing is that the gates are now there.
JIuKBuDatoR
Auto-translated
I added the second beam; it's a piece of the wall.
Where can I download this mod? There's no link in the links section.
Statistics
Welcome our newest member:
recijeb